Overview
AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.
In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.
Key Features
- Uses telephone line, doorbell wire or 1-pair UTP/STP to connect PoE IP devices
- Eliminates extra intermediate PoE switch
- Plug-and-Play deployments
- Reuses in-wall 2 wires infrastructure
- Optional 19’’ 4-bay rack mount chassis(CH-100)
Specifications
Interface / Distance
2 Wire Link
2-Pin Terminal Block x1
10/100 Mbps Ethernet
RJ45 x1
Transmission mode
Receiver RX mode
Maximum TX quantity
7
Cable Type
Doorbell wire 18/20/22 AWG
Telephone cable 24/26AWG
UTP/STP cable: 23/24AWG
Bandwidth
600 Mbps
Power Specifications
Power supply
Input: 100-240VAC
Output: 65W@56VDC Power Adapter
Unit Power Consumption
3 watts
Physical Specifications
Dimensions (LxWxH)
85.4 x 47.1 x 23 mm (3.36×1.85×0.91″)
Weight
0.2 kg (0.44 lb)
Connectors
2P Terminal Blockx1, RJ45 x1, DC Jack x1
Mounting Type
Wall mount
Environmental Specifications
Operating Temperature
-20°C ~ 60°C (-28°F ~ 140°F)
Storage Temperature
-20°C ~ 85°C (-28°F ~ 185°F)
Relative Humidity
5% ~ 95% non-condensing
Certifications
EMC
CE, FCC, VCCI, C-Tick
Safety
EN60950-1
LEDs
LAN
Ethernet status
PWR
Power status
LINK
EPo2 TX device connect status
